Markus Mader, M. Sc.
PhD candidate
Department of Microsystems Engineering (IMTEK)
Albert-Ludwigs University of Freiburg
Georges-Köhler-Allee 103 | 79110 Freiburg im Breisgau | Germany
This email address is being protected from spambots. You need JavaScript enabled to view it. This email address is being protected from spambots. You need JavaScript enabled to view it.
Curriculum Vitae
Professional experience
- 2012 - 2019: Studies in chemistry (Albert Ludwig University Freiburg)
- since 2019: PhD candidate at the NeptunLab
Journal Papers
F. Mayoussi, Y. Chen, D. Mössner, S. Franco Corredor, A. Goralczyk, M. Mader, A. Warmbold, F. Kotz-Helmer, D. Helmer ,B. E. Rapp, Smooth Transparent Omniphobic Coatings with Remarkable Liquid Repellence, Adv. Mater. Interfaces, 2022, 2201080| Link
Kluck, S., Hambitzer, L., Luitz, M. et al. Replicative manufacturing of metal moulds for low surface roughness polymer replication. Nat Commun 13, 5048 (2022). Link
P. Pezeshkpour, K. Sachsenheimer, A. Goralczyk, F. Mayoussi, M. Mader, F. Kotz-Helmer, D. Helmer, B. E. Rapp, A Real-Time Capacitive Sensor to Detect the Stability of Salvinia Layers on Porous Superhydrophobic Polymers Under Shear, Adv. Mater. Technol., 2022, 2200287 | Link
M. Mader, L. Hambitzer, P. Schlautmann, S. Jenne, C. Greiner, F. Hirth, D. Helmer, F. Kotz-Helmer, B.E. Rapp: "Melt-Extrusion-Based Additive Manufacturing of Transparent Fused Silica Glass", Adv. Sci., 2021, 8, 2103180 | Link
M. Mader, C. Rein, E. Konrat, S.L. Meermeyer, C. Lee-Thedieck, F. Kotz-Helmer, B.E. Rapp: "Fused Deposition Modeling of Microfluidic Chips in Transparent Polystyrene", Micromachines, 2021, 12(11), 1348 | Link
, , , , , , , , , High Resolution Patterning of an Organic–Inorganic Photoresin for the Fabrication of Platinum Microstructures. Adv. Mater. 2021, 33, 2101992 | Link
M. Mader, O. Schlatter, B. Heck, A. Warmbold, A. Dorn, H. Zappe, P. Risch, D. Helmer, F. Kotz, B. E. Rapp: “High-throughput injection molding of transparent fused silica glass”, Science, 2021 | Link
F. Kotz, M. Mader, N. Dellen, P. Risch, A. Kick, D. Helmer, B. E. Rapp: “Fused deposition modeling of microfluidic chips in polymethylmethacrylate”, Micromachines, 11(9), 873, 2020. | Link
B. Stolz, M. Mader, L. Volk, T. Steinberg, R. Mülhaupt: "Cryo-3D Printing of Hierarchically Porous Polyhydroxymethylene Scaffolds for Hard Tissue Regeneration", Macromol. Mater. Eng., 2021, 306, 2000541 | Link
B. Stolz, F. Mönkemeyer, M. Mader, S. Schmidt, L. Volk, T. Steinberg, B. Bruchmann, R. Mülhaupt: "Polyhydroxymethylenes as Multifunctional High Molecular Weight Sugar Alcohols Tailored for 3D Printing and Medical Applications", Macromolecular Chemistry and Physics, 2020, 221, 2000132 | Link
Reviews
Books and Book chapters
Conference Contributions
Markus Mader, Leonhard Hambitzer, Holger Becker, Frederik Kotz-Helmer, Bastian E. Rapp: "High-throughput manufacturing of transparent fused silica glass by injection molding and extrusion", talk, SPIE Photonics West, San Francisco, USA, 2022
Markus Mader, Frederik Kotz-Helmer, Bastian E. Rapp: "Spritzguss von transparentem mikrostrukturiertem Quarzglas", talk, MikroSystemTechnik Kongress 2021, Ludwigsburg, Germany, 2021
Markus Mader, Frederik Kotz, Bastian E. Rapp: "Towards high-throughput polymer replication of transparent fused silica glass", talk, SPIE Photonics West, San Francisco, USA, 2021